SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: testfield_general. v. 19193 (2013-06-27 12:55:46) wdobler
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
The verbose level is ip= 14 (ldebug= F )
This is a 3-D run
nxgrid, nygrid, nzgrid= 16 16 16
Lx, Ly, Lz= 6.28318548 6.28318548 6.28318548
Vbox= 248.050232
input_persist_forcing: 0.00000000 0.00000000 0.00000000
input_persist_forcing: -10.0000000
rsnap: read snapshot var.dat in 0.0000000000000000 seconds
setup_slices: slice_position = p
setup_slices: ix_loc,iy_loc,iz_loc,iz2_loc, (video files) = 4 4 4 19
units_general: unit_velocity= 1.0000000000000000
units_general: unit_density= 1.0000000000000000
units_general: unit_length= 1.0000000000000000
units_general: unit_magnetic= 3.5449078083038330
units_eos: unit_temperature= 1.2027220775801925E-008
units_eos: cp, lnTT0, cs0, pp0, Rgas= 1.00000000 0.00000000 1.00000000 1.00000000 1.00000000
alpha_fine = 7.2973525643000000E-003
sigma_Thomson_cgs = 6.6524587321600003E-025
diffusion: nothing (i.e. no mass diffusion)
initialize_density: no need to read initial stratification for lanti_shockdiffusion=F.
select_eos_variable: Using lnrho and cs2
initialize_testfield: etatest= 4.99999989E-03
resistivity: constant eta
viscous force: nu*(del2u+graddivu/3+2S.glnrho)
sh: 1: Syntax error: Bad fd number
pencil_consistency_check: checking pencil case
pencil_consistency_check: checking requested pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: results are independent of pencil initialization
pencil_consistency_check: checking diagnostics pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: set lpencil_check_diagnos_opti=T in run.in to report
pencil_consistency_check: optimisation possibilities for diagnostics pencils
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: diagnostics are independent of pencil initialization
pencil_consistency_check: all tests passed
pde: ENTER
SVN: ------- v. ( ) $Id$
calc_pencils_energy: max(advec_cs2) = 19.4536667
duu_dt: SOLVE
Bcs for ux, x: < she>, y: < p>, z: < p>
Bcs for uy, x: < she>, y: < p>, z: < p>
Bcs for uz, x: < she>, y: < p>, z: < p>
duu_dt: max(advec_uu) = 0.00000000
dlnrho_dt: SOLVE
Bcs for lnrho, x: < she>, y: < p>, z: < p>
dlnrho_dt: max(diffus_diffrho ) = 0.00000000
dlnrho_dt: max(diffus_diffrho3) = 0.00000000
daatest_dt: SOLVE
Bcs for Axtest, x: < she>, y: < p>, z: < p>
Bcs for Aytest, x: < she>, y: < p>, z: < p>
Bcs for Aztest, x: < she>, y: < p>, z: < p>
shearing: Sshear,Sshear1= -0.100000001 -0.100000001
shearing: qshear,qshear0= 0.00000000 0.00000000
---it-------t---------dt-------urms------umax-------oum------b11rms----b21rms----b12rms----b22rms-----alp11------alp21------alp12------alp22------eta11------eta21------eta12------eta22---
0 0.000 7.75E-02 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00
50 3.761 7.41E-02 2.558E-02 6.018E-02 2.958E-03 9.915E-02 9.487E-02 8.897E-02 8.660E-02 -1.624E-03 4.732E-04 3.060E-04 -1.534E-03 2.949E-04 2.033E-06 3.172E-05 2.997E-04
100 7.453 7.39E-02 2.855E-02 7.077E-02 3.641E-03 1.791E-01 1.761E-01 1.794E-01 1.833E-01 -2.949E-03 4.532E-04 -1.483E-04 -3.260E-03 6.054E-04 2.878E-05 1.075E-04 6.177E-04
150 11.141 7.35E-02 3.138E-02 9.100E-02 4.238E-03 2.281E-01 2.148E-01 2.400E-01 2.365E-01 -3.775E-03 9.962E-04 -6.377E-05 -4.344E-03 8.077E-04 7.758E-05 1.776E-04 8.220E-04
200 14.809 7.31E-02 3.323E-02 9.085E-02 4.598E-03 2.676E-01 2.452E-01 2.961E-01 2.736E-01 -4.300E-03 1.431E-03 -6.573E-05 -5.623E-03 1.014E-03 1.245E-04 2.373E-04 1.036E-03
Simulation finished after 201 time-steps
Writing final snapshot at time t = 14.881595015525818
Wall clock time [hours] = 1.606E-03 (+/- 2.7778E-07)
Wall clock time/timestep/meshpoint [microsec] = 7.022079
Wall clock time/timestep/local meshpoint [microsec] = 7.022079
Rhs wall clock time/timestep/local meshpoint [microsec] = 9.944782
Maximum used memory per cpu [MBytes] = 17.484
Maximum used memory [MBytes] = 17.484
real 13.24
user 13.13
sys 0.05