SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
The verbose level is ip= 16 (ldebug= F )
This is a 1-D run
nxgrid, nygrid, nzgrid= 128 1 1
Lx, Ly, Lz= 6.28318548 6.28318548 6.28318548
Vbox= 6.28318548
rsnap: read snapshot var.dat in 0.0000000000000000 seconds
setup_slices: slice_position = p
setup_slices: ix_loc,iy_loc,iz_loc, (video files) = 4 4 4
units_general: unit_velocity= 1.0000000000000000
units_general: unit_density= 1.0000000000000000
units_general: unit_length= 1.0000000000000000
units_general: unit_magnetic= 3.5449078083038330
units_eos: unit_temperature= 4.8108880235694808E-009
units_eos: cp, lnTT0, cs0, pp0, Rgas= 1.00000000 0.405465186 1.00000000 0.600000024 0.399999976
alpha_fine = 7.2973525643000000E-003
sigma_Thomson_cgs = 6.6524587321600003E-025
diffusion: nothing (i.e. no mass diffusion)
initialize_density: no need to read initial stratification for lanti_shockdiffusion=F.
select_eos_variable: Using lnrho and ss
gammacr1= 0.333333373
viscous force: nu*(del2u+graddivu/3+2S.glnrho)
sh: 1: Syntax error: Bad fd number
pencil_consistency_check: checking pencil case
pencil_consistency_check: checking requested pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: possible overcalculation... pencil lnrho ( 17) is requested, but does not appear to be required!
pencil_consistency_check: possible overcalculation... pencil rho1 ( 19) is requested, but does not appear to be required!
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: results are independent of pencil initialization
pencil_consistency_check: checking diagnostics pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: set lpencil_check_diagnos_opti=T in run.in to report
pencil_consistency_check: optimisation possibilities for diagnostics pencils
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: diagnostics are independent of pencil initialization
pencil_consistency_check: all tests passed
pde: ENTER
SVN: ------- v. ( ) $Id$
calc_pencils_energy: max(advec_cs2) = 415.011536
duu_dt: SOLVE
Bcs for ux, x: < p>, y: < p>, z: < p>
Bcs for uy, x: < p>, y: < p>, z: < p>
Bcs for uz, x: < p>, y: < p>, z: < p>
duu_dt: max(advec_uu) = 20.3656960
dlnrho_dt: SOLVE
Bcs for lnrho, x: < p>, y: < p>, z: < p>
dlnrho_dt: max(diffus_diffrho ) = 0.00000000
dlnrho_dt: max(diffus_diffrho3) = 0.00000000
SOLVE decr_dt
Bcs for ecr, x: < p>, y: < p>, z: < p>
decr_dt: cosmicray_diff= 3.99999991E-02
decr_dt: max(diffus_cr) = 16.6004620
--it------t--------dt-------urms-------rhom-------ecrm------ecrmax---
0 0.000 8.63E-03 7.071E-01 1.000E+00 1.000E+00 1.000E+00
50 0.441 9.18E-03 5.917E-01 1.000E+00 1.020E+00 1.930E+00
100 0.939 1.10E-02 3.064E-01 1.000E+00 1.059E+00 2.492E+00
150 1.480 1.02E-02 2.600E-01 1.000E+00 1.058E+00 1.835E+00
Simulation finished after 151 time-steps
Writing final snapshot at time t = 1.4902989559341222
Wall clock time [hours] = 8.681E-06 (+/- 2.7778E-07)
Wall clock time/timestep/meshpoint [microsec] = 1.616825
Wall clock time/timestep/local meshpoint [microsec] = 1.616825
Rhs wall clock time/timestep/local meshpoint [microsec] = 1.616825
Maximum used memory per cpu [MBytes] = 10.500
Maximum used memory [MBytes] = 10.500
real 0.17
user 0.17
sys 0.00