SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
The verbose level is ip= 14 (ldebug= F )
This is a 1-D run
nxgrid, nygrid, nzgrid= 64 1 1
Lx, Ly, Lz= 6.28318548 6.28318548 6.28318548
Vbox= 6.28318548
rsnap: read snapshot var.dat in 3.1250000000000000E-002 seconds
setup_slices: slice_position = p
setup_slices: ix_loc,iy_loc,iz_loc, (video files) = 4 4 4
units_general: unit_velocity= 1.0000000000000000
units_general: unit_density= 1.0000000000000000
units_general: unit_length= 1.0000000000000000
units_general: unit_magnetic= 3.5449078083038330
alpha_fine = 7.2973525643000000E-003
sigma_Thomson_cgs = 6.6524587321600003E-025
chiral_diffXX, chiral_diff, chiral_diffZZ = 4.99999989E-03 4.99999989E-03 4.99999989E-03
sh: 1: Syntax error: Bad fd number
pencil_consistency_check: checking pencil case
pencil_consistency_check: checking requested pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: possible overcalculation... pencil uu ( 99) is requested, but does not appear to be required!
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: results are independent of pencil initialization
pencil_consistency_check: checking diagnostics pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: set lpencil_check_diagnos_opti=T in run.in to report
pencil_consistency_check: optimisation possibilities for diagnostics pencils
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: diagnostics are independent of pencil initialization
pencil_consistency_check: all tests passed
pde: ENTER
SVN: ------- v. ( ) $Id$
duu_dt: diagnostics ...
SOLVE dXY_dt
Bcs for XX_chiral, x: < p>, y: < p>, z: < p>
Bcs for YY_chiral, x: < p>, y: < p>, z: < p>
dXY_chiral_dt: max(diffus_chiral) = 0.518764436
--it-----t--------dt------XXm-----YYm----XXmax---YYmax--
0 0.000 4.82E-01 0.1410 0.00141 0.99620 0.00999
2 0.964 4.82E-01 0.4978 0.29240 0.99304 0.75141
4 1.928 4.82E-01 0.5932 0.37601 0.99833 0.96317
6 2.891 4.82E-01 0.6074 0.38873 0.99969 0.99532
8 3.855 4.82E-01 0.6092 0.39036 0.99995 0.99942
10 4.819 4.82E-01 0.6094 0.39057 0.99999 0.99993
12 5.783 4.82E-01 0.6094 0.39060 1.00000 0.99999
14 6.747 4.82E-01 0.6094 0.39060 1.00000 1.00000
16 7.711 4.82E-01 0.6094 0.39061 1.00000 1.00000
18 8.674 4.82E-01 0.6094 0.39061 1.00000 1.00000
Simulation finished after 19 time-steps
Writing final snapshot at time t = 9.1563722044229507
Wall clock time [hours] = 0.00 (+/- 2.7778E-07)
Wall clock time/timestep/meshpoint [microsec] = 0.000000
Wall clock time/timestep/local meshpoint [microsec] = 0.000000
Rhs wall clock time/timestep/local meshpoint [microsec] = 25.69901
Maximum used memory per cpu [MBytes] = 7.250
Maximum used memory [MBytes] = 7.250
real 0.28
user 0.06
sys 0.01