SVN: ------- v. ( ) $Id$
SVN: start.in,v v. 1.1 (2008-11-30 03:16:25) wlyra
SVN: run.in,v v. 1.1 (2008-11-30 03:16:24) wlyra
initialize_mpicomm: enabled MPI
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: gravity_r.f90,v v. 1.1 (2018/08/24 15:48:10) wlyra
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
The verbose level is ip= 16 (ldebug= F )
This is a 2-D run
nxgrid, nygrid, nzgrid= 32 64 1
Lx, Ly, Lz= 1.0000000000000000 1.0000000000000000 0.20000000000000001
Vbox= 1.5000000000000000
rsnap: read snapshot var.dat in 1.4115699999999999E-004 seconds
units_general: unit_velocity= 1.0000000000000000
units_general: unit_density= 1.0000000000000000
units_general: unit_length= 1.0000000000000000
units_general: unit_magnetic= 3.5449077018110318
units_eos: unit_temperature= 1.2027220936797545E-008
units_eos: cp, lnTT0, cs0, pp0, Rgas= 1.0000000000000000 -9.2103403719761818 1.0000000000000000E-002 1.0000000000000009E-004 1.0000000000000000
alpha_fine = 7.2973525643000000E-003
sigma_Thomson_cgs = 6.6524587321600003E-025
initialize_gravity: shear with Omega proto r^-q, q= 0.0000000000000000
diffusion: nothing (i.e. no mass diffusion)
initialize_density: no need to read initial stratification for lanti_shockdiffusion=F.
select_eos_variable: Using rho and cs2
resistivity: constant eta
WARNING: initialize_magnetic: Resistivity coefficient eta is zero!
sh: 1: Syntax error: Bad fd number
pencil_consistency_check: checking pencil case
pencil_consistency_check: checking requested pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: possible overcalculation... pencil rho ( 13) is requested, but does not appear to be required!
pencil_consistency_check: possible overcalculation... pencil grho ( 16) is requested, but does not appear to be required!
pencil_consistency_check: possible overcalculation... pencil ugrho ( 18) is requested, but does not appear to be required!
pencil_consistency_check: possible overcalculation... pencil ugu ( 115) is requested, but does not appear to be required!
pencil_consistency_check: possible overcalculation... pencil uuadvec_guu ( 140) is requested, but does not appear to be required!
pencil_consistency_check: possible overcalculation... pencil del2a ( 165) is requested, but does not appear to be required!
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: results are independent of pencil initialization
pencil_consistency_check: checking diagnostics pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: set lpencil_check_diagnos_opti=T in run.in to report
pencil_consistency_check: optimisation possibilities for diagnostics pencils
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: diagnostics are independent of pencil initialization
pencil_consistency_check: all tests passed
pde: ENTER
SVN: ------- v. ( ) $Id$
calc_pencils_energy: max(advec_cs2) = 0.50570000000000004
duu_dt: SOLVE
Bcs for ux, x: < f>, y: < p>, z: < p>
Bcs for uy, x: < f>, y: < p>, z: < p>
Bcs for uz, x: < f>, y: < p>, z: < p>
duu_dt: max(advec_uu) = 5.3398363172274199E-014
dlnrho_dt: SOLVE
Bcs for lnrho, x: < f>, y: < p>, z: < p>
dlnrho_dt: max(diffus_diffrho ) = 0.0000000000000000
dlnrho_dt: max(diffus_diffrho3) = 0.0000000000000000
daa_dt: SOLVE
Bcs for Ax, x: < f>, y: < p>, z: < p>
Bcs for Ay, x: < f>, y: < p>, z: < p>
Bcs for Az, x: < f>, y: < p>, z: < p>
daa_dt: iresistivity=eta-const
daa_dt: max(diffus_eta) = 0.0000000000000000
daa_dt: max(diffus_eta2) = 0.0000000000000000
daa_dt: max(diffus_eta3) = 0.0000000000000000
---it-------t----------dt----------umax--------rhomin--------rhom--------rhomax-------nshift--------amax----------a2m----------azm---------arms---------bmax---------bx2m---------by2m----------b2m---------brms-----
0 0.0000 5.625E-01 2.000E+00 1.000E+00 1.000E+00 1.000E+00 3.600E+01 2.801E-04 2.827E-09 1.885E-05 5.317E-05 1.102E-03 9.202E-08 9.102E-08 1.830E-07 4.278E-04
5 2.8124 5.625E-01 2.000E+00 9.990E-01 1.000E+00 1.001E+00 3.600E+01 2.801E-04 2.827E-09 1.885E-05 5.317E-05 1.102E-03 9.202E-08 9.102E-08 1.830E-07 4.278E-04
10 5.6249 5.625E-01 2.000E+00 9.981E-01 1.000E+00 1.002E+00 3.600E+01 2.802E-04 2.827E-09 1.885E-05 5.317E-05 1.103E-03 9.202E-08 9.102E-08 1.830E-07 4.278E-04
15 8.4373 5.625E-01 2.000E+00 9.971E-01 1.000E+00 1.003E+00 3.600E+01 2.802E-04 2.827E-09 1.885E-05 5.317E-05 1.103E-03 9.202E-08 9.101E-08 1.830E-07 4.278E-04
20 11.2498 5.625E-01 2.000E+00 9.961E-01 1.000E+00 1.004E+00 3.600E+01 2.802E-04 2.827E-09 1.885E-05 5.317E-05 1.103E-03 9.201E-08 9.101E-08 1.830E-07 4.278E-04
Simulation finished after 21 time-steps
Writing final snapshot at time t = 11.812254875183900
Wall clock time [hours] = 3.675E-05 (+/- 2.7778E-13)
Wall clock time/timestep/meshpoint [microsec] = 3.075911
Wall clock time/timestep/local meshpoint [microsec] = 12.30364
Rhs wall clock time/timestep/local meshpoint [microsec] = 46.27300
Maximum used memory per cpu [MBytes] = 26.957
Maximum used memory [MBytes] = 106.691
real 1.15
user 3.43
sys 0.10