SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: particles_dust.f90 v. 1.1 (2018/08/24 15:48:10) wlyra
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
The verbose level is ip= 14 (ldebug= F )
This is a 1-D run
nxgrid, nygrid, nzgrid= 64 1 1
Lx, Ly, Lz= 6.2830000000000004 6.2830000000000004 6.2830000000000004
Vbox= 6.2830000000000004
rsnap: read snapshot var.dat in 0.0000000000000000 seconds
setup_slices: slice_position = p
setup_slices: ix_loc,iy_loc,iz_loc, (video files) = 4 4 4
units_general: unit_velocity= 1.0000000000000000
units_general: unit_density= 1.0000000000000000
units_general: unit_length= 1.0000000000000000
units_general: unit_magnetic= 3.5449077018110318
units_eos: unit_temperature= 1.2027220936797545E-008
units_eos: cp, lnTT0, cs0, pp0, Rgas= 1.0000000000000000 0.0000000000000000 1.0000000000000000 1.0000000000000000 1.0000000000000000
alpha_fine = 7.2973525643000000E-003
sigma_Thomson_cgs = 6.6524587321600003E-025
select_eos_variable: Using lnrho and cs2
initialize_particles: dust-to-gas ratio eps_dtog= 1.0000000000000000
initialize_particles: mass per constituent particle mpmat= 0.0000000000000000
initialize_particles: mass per superparticle mp_swarm = 1.6361979166666669E-002
initialize_particles: number density per superparticle np_swarm= 0.0000000000000000
initialize_particles: mass density per superparticle rhop_swarm= 0.16666666666666666
initialize particles: set minimum collisional time-scale equal to two times the Courant time-step.
initialize_particles_map: selected triangular-shaped-cloud for particle-mesh method.
sh: 1: Syntax error: Bad fd number
pencil_consistency_check: checking pencil case
dxxp_dt: Calculate dxxp_dt
dxxp_dt: Particles boundary condition bcpx=p
dxxp_dt: Particles boundary condition bcpy=p
dxxp_dt: Particles boundary condition bcpz=p
dxxp_dt: Set rate of change of particle position equal to particle velocity.
dvvp_dt: Calculate dvvp_dt
particle_gravity: Calculating gravity
particle_gravity: No gravity in x-direction.
particle_gravity: No gravity in z-direction.
particle_gravity: No radial gravity
dvvp_dt_selfgrav: add self-gravity
At line 282 of file particles_selfgravity.f90
Fortran runtime warning: An array temporary was created for argument 'xxp' of procedure 'interpolate_quadratic_spline'
At line 282 of file particles_selfgravity.f90
Fortran runtime warning: An array temporary was created for argument 'inear' of procedure 'interpolate_quadratic_spline'
pencil_consistency_check: checking requested pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: possible overcalculation... pencil gpotself ( 194) is requested, but does not appear to be required!
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: results are independent of pencil initialization
pencil_consistency_check: checking diagnostics pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: set lpencil_check_diagnos_opti=T in run.in to report
pencil_consistency_check: optimisation possibilities for diagnostics pencils
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: diagnostics are independent of pencil initialization
pencil_consistency_check: all tests passed
pde: ENTER
SVN: ------- v. ( ) $Id$
duu_dt: diagnostics ...
dvvp_dt_pencil: calculate dvvp_dt
dvvp_dt_pencil: ldraglaw_purestokes= F
dvvp_dt: Add drag force; tausp= 0.10000000000000001
---it------t-------vpx2m------rhopmax----
0 0.00 4.903E-09 1.000999E+00
5 0.10 4.985E-09 1.001009E+00
10 0.20 5.079E-09 1.001019E+00
15 0.30 5.178E-09 1.001029E+00
20 0.40 5.281E-09 1.001039E+00
25 0.50 5.386E-09 1.001049E+00
30 0.60 5.493E-09 1.001060E+00
35 0.70 5.603E-09 1.001070E+00
40 0.80 5.715E-09 1.001081E+00
45 0.90 5.829E-09 1.001092E+00
50 1.00 5.945E-09 1.001102E+00
55 1.10 6.064E-09 1.001113E+00
60 1.20 6.185E-09 1.001124E+00
65 1.30 6.308E-09 1.001136E+00
70 1.40 6.434E-09 1.001147E+00
75 1.50 6.562E-09 1.001158E+00
80 1.60 6.693E-09 1.001170E+00
85 1.70 6.827E-09 1.001181E+00
90 1.80 6.963E-09 1.001193E+00
95 1.90 7.102E-09 1.001205E+00
Simulation finished after 96 time-steps
Writing final snapshot at time t = 1.9199999999999910
Wall clock time [hours] = 1.222E-05 (+/- 2.7778E-07)
Wall clock time/timestep/(meshpoint+particle) [microsec] = 1.02
Maximum used memory per cpu [MBytes] = 10.250
Maximum used memory [MBytes] = 10.250
real 0.22
user 0.21
sys 0.00