SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
initialize_mpicomm: enabled MPI
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
SVN: ------- v. ( ) $Id$
The verbose level is ip= 14 (ldebug= F )
This is a 3-D run
nxgrid, nygrid, nzgrid= 32 32 32
Lx, Ly, Lz= 6.2831853071795862 6.2831853071795862 6.2831853071795862
Vbox= 248.05021344239853
rsnap: read snapshot var.dat in 1.8951800000000001E-004 seconds
units_general: unit_velocity= 1.0000000000000000
units_general: unit_density= 1.0000000000000000
units_general: unit_length= 1.0000000000000000
units_general: unit_magnetic= 3.5449077018110318
units_eos: unit_temperature= 4.8108883747190188E-009
units_eos: cp, lnTT0, cs0, pp0, Rgas= 1.0000000000000000 0.40546510810816422 1.0000000000000000 0.59999999999999998 0.40000000000000008
alpha_fine = 7.2973525643000000E-003
sigma_Thomson_cgs = 6.6524587321600003E-025
select_eos_variable: Using lnrho and ss
initialize_magnetic: constant resistivity, eta = 0.10000000000000001
viscous force: nu*del2v
sh: 1: Syntax error: Bad fd number
pencil_consistency_check: checking pencil case
pencil_consistency_check: checking requested pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: possible overcalculation... pencil b2 ( 148) is requested, but does not appear to be required!
pencil_consistency_check: possible overcalculation... pencil bunit ( 159) is requested, but does not appear to be required!
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: results are independent of pencil initialization
pencil_consistency_check: checking diagnostics pencils
pencil_consistency_check: performing small pencil check
pencil_consistency_check: the small pencil check reported no problems
pencil_consistency_check: performing full pencil check (takes a while)
pencil_consistency_check: set lpencil_check_diagnos_opti=T in run.in to report
pencil_consistency_check: optimisation possibilities for diagnostics pencils
pencil_consistency_check: checking dependence on pencil initialization
pencil_consistency_check: diagnostics are independent of pencil initialization
pencil_consistency_check: all tests passed
pde: ENTER
SVN: ------- v. ( ) $Id$
duu_dt: SOLVE
Bcs for ux, x: < p>, y: < p>, z: < p>
Bcs for uy, x: < p>, y: < p>, z: < p>
Bcs for uz, x: < p>, y: < p>, z: < p>
duu_dt: max(advec_uu) = 3.0410605159571887E-002
--it-----t------dt-----dtv-----uxmax--------uymax--------uzmax-------dbxmax-------dbymax-------dbzmax-----divbmax-
0 0.000 5.22E-02 1.00 9.951847E-04 9.951847E-04 3.980739E-03 9.951847E-04 9.951847E-04 3.980739E-03 0.000000
10 0.522 5.22E-02 1.00 6.210541E-04 6.210541E-04 2.486972E-03 6.218658E-04 6.218658E-04 2.487361E-03 0.000000
20 1.044 5.23E-02 1.00 3.879110E-04 3.879110E-04 1.552713E-03 3.882261E-04 3.882261E-04 1.552862E-03 0.000000
30 1.567 5.23E-02 1.00 2.421340E-04 2.421340E-04 9.688888E-04 2.422354E-04 2.422354E-04 9.689363E-04 0.000000
40 2.091 5.23E-02 1.00 1.510578E-04 1.510578E-04 6.043688E-04 1.511038E-04 1.511038E-04 6.043851E-04 0.000000
50 2.614 5.23E-02 1.00 9.421411E-05 9.421411E-05 3.769114E-04 9.423083E-05 9.423083E-05 3.769199E-04 0.000000
Simulation finished after 51 time-steps
Writing final snapshot at time t = 2.6662288491229114
Wall clock time [hours] = 3.316E-04 (+/- 2.7778E-13)
Wall clock time/timestep/meshpoint [microsec] = 0.7142589
Wall clock time/timestep/local meshpoint [microsec] = 5.714071
Rhs wall clock time/timestep/local meshpoint [microsec] = 9.189449
Maximum used memory per cpu [MBytes] = 30.805
Maximum used memory [MBytes] = 244.668
real 4.42
user 30.70
sys 2.38