Authorization required, but no authorization protocol specified Authorization required, but no authorization protocol specified Authorization required, but no authorization protocol specified ===================================================================== WARNING: using SINGLE PRECISION, you'd better know what you're doing! ===================================================================== SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ initialize_mpicomm: enabled MPI SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id$ SVN: ------- v. ( ) $Id The verbose level is ip= 14 (ldebug= F ) This is a 0-D run nxgrid, nygrid, nzgrid= 1 1 1 Lx, Ly, Lz= 1.00000000 6.28318548 6.28318548 Vbox= 1.00000000 rsnap: read snapshot var.dat in 9.5968394788745193E-005 seconds setup_slices: slice_position = p setup_slices: ix_loc,iy_loc,iz_loc, (video files) = 4 4 4 units_general: unit_velocity= 100000.00000000000 units_general: unit_density= 1.0000000000000002E-006 units_general: unit_length= 100000000.00000000 units_general: unit_magnetic= 3.5449078083038330 alpha_fine = 7.2973525643000000E-003 sigma_Thomson_cgs = 6.6524587321600003E-025 initialize_eos: assume cp is not 1, yH0= 0.00000000 initialize_eos: reference values for ionization initialize_eos: TT_ion,lnrho_e,ss_ion= 157821.266 12.7770157 5.90480585E-03 initialize_eos: reference values for ionization initialize_eos: TT_ion,ss_ion,kappa0= 157821.266 5.90480585E-03 427682880. initialize_eos: lnrho_e,lnrho_H,lnrho_p,lnrho_He,lnrho_e_= 12.7770157 24.0509739 24.0501575 26.1197014 8.43836689 initialize_density: 0-D run, turned off continuity equation diffusion: nothing (i.e. no mass diffusion) initialize_density: no need to read initial stratification for lanti_shockdiffusion=F. initialize_hydro: 0-D run, turned off advection of velocity. initialize_energy: 0-D run, turned off pressure gradient and advection of entropy initialize_energy: nheatc_max,iheatcond= 4 nothing nothing nothing nothing heat conduction: nothing WARNING: get_gamma_etc: gamma, cp, and cv are not constant in eos_fixed_ionization. The values provided are for one-atomic ideal gas. Use at own risk! acCompile: No changes in input; running make in case DSL code has changed; logging to /home/pencil/GPU/samples/0d-tests/heating_noionize/ac_compilation.log Thu Nov 12 12:33:55 2026 : Done setupConfig && acCompile Thu Nov 12 12:33:55 2026 : acGridInit: n[xyz]grid: (1,1,1) n[xyz]local (1,1,1) Thu Nov 12 12:33:55 2026 : acGridInit: Creating device Thu Nov 12 12:33:57 2026 : acGridInit: decomp: (1,1,1) Thu Nov 12 12:33:57 2026 : acGridInit: Stencil order: 6 Thu Nov 12 12:33:58 2026 : acGridInit: Done Thu Nov 12 12:33:59 2026 : DONE initializeGPU WARNING: run: Pencil consistency check not supported on GPUs. You can consider running it with a CPU-only build! pde: ENTER SVN: ------- v. ( ) $Id$ ---it-------t---------dt-------ethm--------TTm-------yHm-------ssm-------rhom--- 0 0.00E+00 2.00E-01 6.951E-01 7.134E+01 0.00E+00 1.00E-01 1.00E+00 200 4.00E+01 2.00E-01 4.070E+01 4.177E+03 0.00E+00 1.40E-01 1.00E+00 400 8.00E+01 2.00E-01 8.070E+01 8.282E+03 0.00E+00 1.46E-01 1.00E+00 600 1.20E+02 2.00E-01 1.207E+02 1.239E+04 0.00E+00 1.50E-01 1.00E+00 800 1.60E+02 2.00E-01 1.607E+02 1.649E+04 0.00E+00 1.53E-01 1.00E+00 1000 2.00E+02 2.00E-01 2.007E+02 2.060E+04 0.00E+00 1.55E-01 1.00E+00 1200 2.40E+02 2.00E-01 2.407E+02 2.470E+04 0.00E+00 1.57E-01 1.00E+00 1400 2.80E+02 2.00E-01 2.807E+02 2.881E+04 0.00E+00 1.58E-01 1.00E+00 1600 3.20E+02 2.00E-01 3.207E+02 3.292E+04 0.00E+00 1.60E-01 1.00E+00 1800 3.60E+02 2.00E-01 3.607E+02 3.702E+04 0.00E+00 1.61E-01 1.00E+00 Simulation finished after 1801 time-steps Writing final snapshot at time t = 360.20001878589392 Wall clock time [hours] = 2.417E-02 (+/- 2.7778E-13) Wall clock time/timestep/meshpoint [microsec] = 48316.52 Wall clock time/timestep/local meshpoint [microsec] = 48316.52 Rhs wall clock time/timestep/local meshpoint [microsec] = 2288.801 After substep wall clock time/timestep/local meshpoint [microsec] = 501.5914 Before+After boundary wall clock time/timestep/local meshpoint [microsec] = 10484.50 Diagnostics wall clock time/timestep/local meshpoint [microsec] = 2.016431 Timestep wall clock time/timestep/local meshpoint [microsec] = 13284.75 Timestep (without waiting) wall clock time/timestep/local meshpoint [microsec] = 13283.79 Timestep wall clock time/timestep/meshpoint [microsec] = 13284.75 Timestep (without waiting) wall clock time/timestep/meshpoint [microsec] = 13283.79 Diagnostics wall clock time/timestep/meshpoint [microsec] = 2.016431 Rhs wall clock time/timestep/meshpoint [microsec] = 2288.801 After substep wall clock time/timestep/meshpoint [microsec] = 501.5914 Before+After boundary wall clock time/timestep/meshpoint [microsec] = 10484.50 Maximum used memory per cpu [MBytes] = 637.965 Maximum used memory [MBytes] = 637.965 real 87.41 user 206.93 sys 15.52