This is information concerns the input files used for the paper titled
"Dynamo in weakly collisional non-magnetized plasmas impeded by Landau damping of magnetic fields"
by I. Pusztai et al.

The simulations were performed with Gkyll built with
cd65328c077f+ 2228+ default

** GP_flow.lua 
The input for the kinetic Galloway-Proctor flow simulation of Fig. 1. 

** MagneticDiffusion_L0_nu005.lua
This is an example input from the wavelength and collisioonality scan shown in Figs. 2 and 3. 
- This example is for the baseline wavelength (L0~9.73 micron, corresponding to BoxMultiplier=8.0) and a collision scaling factor, C_nu=0.05  
- Other values of the wavelength and C_nu are set by the parameters in the input file called BoxMultiplier and Cnu, respectively.
- Values used in the scan are BoxMultiplier={1.0, 2.0, 4.0, 8.0}, and Cnu={0.05, 0.1, 0.2, 0.5, 1.0}

** Magnetization_B1.lua
This is an example for the magnetization scan shown in Fig. 4. 
- This example corresponds to B=1 T initial magnetic perturbation amplitude (BNoiseAmpl=1.0). 
- The points of the scan used BNoiseAmpl={5.0, 10.0, 15.0, 20.0, 30.0, 45.0, 50.0, 75.0, 100.0}

** Roberts_flow_C_nu0.lua and Roberts_flow_C_nu03.lua
These are inputs for the Roberts flow simulations shown in Fig. 5, corresponding to collision frequency scaling factors C_nu=0 and and 0.3. 
- Note that in the input for C_nu=0, the corresponding input parameter (Cnu) is set to 1.0, but the sections oc the input responsible for 
  collisions are commented out, thus the simulation is run without collisions. 

The tar archive kineticDynamo.tar contains an index.html file with links to the run directories.
An updated version is on the local URL http://www.nordita.org/~brandenb/projects/kineticDynamo.